Rank Insignia
NCO's - Construction and Wear


NCOs insignia was displayed in two places; on the collar of the uniform (also cuffs of the Waffenrock), and on the shoulder straps.  The collars of field blouses were edged in tress (lace) by NCOs, running along the bottom and front of the collar.  On the Waffenrock and the prewar Dienstrock, the tress was sewn to the top and front of the collar instead.


COLLARS AND CUFFS

dressu.jpg (26873 bytes) tressontop.jpg (80396 bytes) tresshat.jpg (6508 bytes)

At left, a Waffenrock showing the collar tress on top and front of the collar.  At centre a Reichswehr period Dienstrock showing the tress on the top of the collar, worn as a dress uniform, and at right, the standard feldbluse showing tress worn on the bottom of the collar.

waffphoto.jpg (40542 bytes)

Tress was also worn on the cuffs of the Waffenrock by NCOs

cuffpatch.jpg (26840 bytes)

ncocuff.jpg (22341 bytes)

waff3.gif (14055 bytes)

SHOULDER STRAPS

Standard enlisted men's shoulder straps were worn by NCOs, with two major differences.  NCO tress was worn on the shoulder strap, and for those NCOs ranked Feldwebel or higher, metal unit devices were used rather than embroidered.

 

Different styles of tress were manufactured during the war; the most common was the style shown at right, and came in two styles; subdued (as in the upper illustration) and also shiny aluminum (as shown below right.) 

Dark green cloth for shoulder straps (as shown below right also) was phased out in favour of field grey (as above left). Shoulder straps were usually not matched to the field blouse, and veteran soldiers preferred to keep the dark green ones in their possession as long as possible.  There was no regulation requiring only field grey shoulder boards be worn, and consequently, little uniformity within units after the dark green should straps began to be phased out in 1940.

Shoulder straps were also, of course, made of black cloth for the black AFV uniform.

In addition to the tress, shoulder boards also displayed ranks above Unterfeldwebel through the use of rank stars; these were in metal with prongs on the back which were poked through the material and bent over to secure them to the boards.

rankpip.jpg (25868 bytes)

sigtress.jpg (15750 bytes)

artys.jpg (13928 bytes)

artyf.jpg (14363 bytes)

tropshould2.jpg (41480 bytes) troptress.jpg (64549 bytes)
Copper-coloured tress was used on tropical uniforms and shoulder boards.
The tress on this shoulder strap seems to have a dark green line through it, in the manner of rank chevron tress.  This sample is from a herringbone-twill tunic. hbtstrap.jpg (12064 bytes)
oldboard.jpg (99410 bytes) Additionally, some prewar shoulder straps were retained throughout the Second World War; they were similar in construction to the standard shoulder straps, but the end was pointed rather than rounded and they lacked waffenfarbe piping.